Z2–02 / CMU Robotics Institute

Zoë2 planetary research rover

Undergraduate Researcher · September 2026–present

Zoë2 is a planetary rover research project at Carnegie Mellon. I work on the embedded firmware that reads battery telemetry and prepares it for use by the rover.

  • C++
  • Teensy 4.1
  • CAN bus
  • PlatformIO

BMS CAN interface

I ported the existing STM32 battery communication code to a Teensy 4.1. Using FlexCAN_T4, I set up the Teensy to poll the battery management system (BMS), receive its CAN frames, and decode readings such as pack voltage and state of charge. The firmware reports status over USB serial.

The Teensy is the interface between the battery protocol and the rover. It interprets the battery’s messages so those readings can later be published on the rover’s CANopen network.

Battery management systemCAN telemetry
Teensy 4.1CAN receive and decode · implemented
Rover CAN networkCANopen forwarding · planned
FIG. 01 Battery telemetry path. The dashed arrow shows the planned connection to the rover network.

Current progress

The Teensy firmware builds, and recorded CAN frames were used to check decoding. I haven’t confirmed live-battery communication in the available test records. My next step is to implement CANopen forwarding and verify the path from the battery to the rover network.