ENGINEERING FIELDNOTES / RÉSUMÉ

Jiayin Tang

Electrical & Computer Engineering · Carnegie Mellon University

Education

Carnegie Mellon University · Pittsburgh, PA

B.S. Electrical and Computer Engineering · Expected May 2029
GPA: 3.89 / 4.00

Coursework: Computer Systems, Electronic Devices and Analog Circuits, and Probability (in progress, Fall 2026); Linear Algebra; Principles of Imperative Computation.

Engineering & research

Lunabotics — Rover avionics ↗

Avionics Subteam · CMU NASA Lunabotics Competition Team
Jan 2026–present

Modeled power distribution with MATLAB Monte Carlo analysis and LTspice transient simulation. Analyzed power-logger data from 30-minute rover tests, built and tested wiring harnesses, and systematically isolated motor integration faults.

Recommended and confirmed that one 30 Ah 6S2P LiPo pack was sufficient in runtime testing, preserving mass margin compared with two packs. Isolated inconsistent ODrive motor calibration after eliminating wiring and controller faults; a teammate performed the calibration fix. Developed the team’s first avionics documentation package.

Zoë2 — Rover embedded systems ↗

Undergraduate Researcher · Robotics Institute, CMU
Sep 2026–present

Ported the existing firmware to Teensy 4.1 and implemented BMS CAN-message decoding. The work focuses on interpreting battery telemetry and adapting the existing implementation to a different microcontroller platform.

Ported the firmware and implemented CAN decoding. Recorded frames were used to check decoding. CANopen forwarding to the rover network is planned.

BORG Lab — SURF · Bioelectronic interfaces ↗

Summer Undergraduate Research Fellow — Sustainability · BORG Lab, CMU
May–Aug 2026

Designed and fabricated a direct resin-printed microwell insert, balancing fit and clearance against organoid retention and media depth. Designed nine distinct array layouts in KLayout with varied electrode dimensions and organoid sizes.

Fabricated a usable resin-printed insert, avoiding the initially planned mold-and-cast workflow. Completed nine layout designs—not nine fabricated arrays. Experimental use with organoids and resin biocompatibility have not been confirmed.

Research Intern · Sharf Lab, UC Santa Cruz

Science Internship Program · Jun–Aug 2024

Research experience in conformal sensor devices and microfabrication. Specific hands-on fabrication responsibilities are awaiting confirmation.

Technical skills

Programming & development: Python, C, C++, MATLAB, Git, PlatformIO

Embedded systems: Teensy 4.1, Arduino, Raspberry Pi, CAN bus

CAD & simulation: SolidWorks, LTspice, KLayout

Hardware & fabrication: Oscilloscopes, multimeters, soldering, wiring harness fabrication, crimping, resin/FDM 3D printing

BACKGROUND SUMMARY / UPDATED OCTOBER 2026
WEB RÉSUMÉ — A DOWNLOADABLE PDF WILL BE ADDED SEPARATELY.